Diag 1 fault on display - how to remove it?
Hi, Ive been messing about with my bike and replaced a couple of breather pipes to the fuel tank as they were a cracked. Now I've got a message on the right hand side screen saying DIAG 1. I've tried pressing just about every button there is to press including holding down the LAP button and pressing the reset button and holding for 5 secs but that didn't get rid of the error. I've had the bike off the road for a bit and took the battery off to recharge it so maybe that is what has caused the error message. Is there anyone out there who can help and my manual doesn't seem to have the answer. Thanks in anticipation.
|
